URE.3601-A LIGHT GRAY BUMPER AND CLADDING ADHESION PRIMER - AEROSOL

Bumper & Cladding Coat™ adhesion primer is an advanced, solvent-based coating designed to help your automotive base clear topcoat system stick to unprimed TPO plastic bumpers. Bumper & Cladding Coat™ adhesion primer sticks tenaciously to unsanded, unscuffed raw TPO plastic. Once the adhesion primer is dry, it can be top-coated with most base clear systems without sanding or scuffing. (6.3 lb/gal VOC). Bumper & Cladding Coat™ adhesion primer is designed to permanently stick to the bumpers, side cladding and trim found on many of today's cars, trucks and SUV's. As everyone knows, most bumpers are made from plastics that are very difficult-to get anything to stick to. Bumper & Cladding Coat™ adhesion primer will stick to raw TPO and polypropylene. Once the primer is on, your basecoat-clear coat will stick.

Polyvance Bumper & Cladding Coat™ Adhesion Primer, 11 fl-oz Net Content, Aerosol Form, Light Gray, Solvent Odor/Scent, Composition: Xylene, Toluene, Aromatic Hydrocarbon, Pm Acetate, Eep, Propane, Butane, 1-Methoxy-2Acetoypropane, Methyl Ethyl Ketone, Resin Blend, 1,2,4-Trimethylbenzene, T-Butyl Acetate, TiO2, Ethylbenzene, Talc, 15 to 60 min Dry Time, Density: 875 g/L, 0.924 Specific Gravity, 600 cPs Viscosity, 755 g/L VOC, Application Method: Paint Gun, Applicable Materials: TPO Plastics

SPECIFICATIONS

Applicable Materials

:

TPO Plastics

Application Method

Paint Gun

Color

Light Gray

Composition

Xylene, Toluene, Aromatic Hydrocarbon, Pm Acetate, Eep, Propane, Butane, 1-Methoxy-2Acetoypropane, Methyl Ethyl Ketone, Resin Blend, 1,2,4-Trimethylbenzene, T-Butyl Acetate, TiO2, Ethylbenzene, Talc

Density

875 g/L

Dry Time

15 to 60 min

Form

Aerosol

Net Content

11 fl-oz

Odor/Scent

Solvent

Specific Gravity

0.924

VOC Content

755 g/L

Viscosity

600 cPs

FEATURES

Sticks to smooth or textured TPO plastics, ideal for easy refinishing of new, unprimed OEM replacement bumpers from Toyota, Nissan, Kia, Subaru and more

No sweat, quit "sweating" your bumpers in the paint booth, no need to clean, sweat, re-clean and so on

Sticks to TPO plastic without sanding or scuffing, just clean the bumper with our 1000 super clean plastic cleaner and shoot the Bumper & Cladding Coat™ adhesion primer on

Simple, ready to spray, 1K formulation means there's no waste, what you don't use, pour back into the can

Compatible with most urethane and polyester-based base/clear top coat systems, Bumper & Cladding Coat™ adhesion primer does not have to be scuffed or sanded prior to top coating and it may be top coated at any time after application

A proven labor-saver since its introduction in 2003

Documents